Can You Get a Clear Bong to Look New Again

Bongs tin can get notoriously dirty and stinky. The resin that builds up on the inside of your bell is a tarry mess and can exist extremely difficult to clean. Some have turned to harsh chemicals (like carburetor cleaner) to remove the crud simply this can get out a dangerous rest that is toxic when heated.

Instead, utilize some natural ingredients and a bit of elbow grease to get your bong spic and bridge clean.

Why You Should Make clean Your Bell Regularly

Source: Grasscity.com

Taste

A big part of the marijuana feel is the taste of your favorite ganja going downward.

You lot might not recall fume has a gustation, but it does. Just like everything else you lot put in your mouth, molecules from decarboxylated weed interact with the sense of taste buds on your tongue to produce all different kinds of flavors.

You might not feel a rush of taste similar you practice when you popular a Jolly Rancher in your oral cavity, but the season is nonetheless in that location nonetheless.

Thing is, when you don't clean your bong, the resin, slime, filthy bong water, and every other source of uncleanness start to give off a season of their own. And that flavor is non good.

If you lot've ever accidentally eaten a bad tomato, that's the taste yous can expect to feel if you don't clean your bell. Information technology'll brand you lot want to wash your mouth out with soap.

The longer you avoid cleaning your bong, the worse it will go.

Smell

Smell is one of the first signs you'll detect that indicates it's time to clean your bell.

Whether information technology comes from buildup on the walls of your bell or the stagnant water in the bottom, it's going to smell bad. And when we say bad, we hateful swamp-water-and-ashes bad.

We don't know about you, only we've never found swamps particularly expert-smelling in the first place. We certainly wouldn't desire to bring one into our home.

That's exactly what you're doing when yous don't clean your bell: creating a festering swamp of stink that will permeate the walls, the carpet, the furniture, and even your dress.

Avert the foul odors by rinsing your bong regularly.

Leaner

Bacteria is the big offender when it comes to reasons why you lot should clean your bong more oft.

Later on only 22 hours, bacteria of all sorts begin growing within a dirty bong. And it merely gets worse over time.

If you don't think that sounds so bad, in extreme situations — we're talking severely dirty bongs — necrotizing pneumonia is a very existent possibility.

Notice the discussion 'necrotizing'? That means that some of your lung tissue dies. Ouch!

Don't take chances severe medical bug. Just clean your bong.

Difficulty

Another skillful reason to clean your bong more often is that information technology becomes more than difficult over time. The longer yous look, the harder yous're going to have to scrub.

If you've e'er had to interruption out the steel wool to get your dinner dishes make clean, that's what you'll have to face the longer you filibuster cleaning your bong.

The thing about washing a bong is you tin can't get your manus down in there to actually scrub.

Not only will you have baked-on resin to contend with, but you also won't exist able to reach it with conventional tools.

That's a recipe for cleaning disaster (and lots of colorful swear words).

Simply if you make clean your ganja gear on a regular ground, it will be infinitely easier to remove the resin, crud, and filth that builds in your bell with every employ.

Which would you rather do: spend several hours trying to clean your bong with harsh chemicals or rinse it with hot water for several seconds?

Nosotros'll take the latter selection every time.

How Oftentimes To Clean Your Bong

Heavy Smokers

For heavy smokers, we recommend cleaning your bong at least every 48 hours.

The heat and smoke from regular employ volition tiresome the growth of harmful bacteria, only only up to a bespeak. Somewhen, cypher you practise curt of removing the bacteria from your bong will forbid information technology from getting into your lungs.

And so if you lot smoke a make clean bong first affair Monday morn, wash the heck out of that thing after your first smoke Midweek morning (48 hours afterwards).

Alternatively, y'all could just make clean your bong every 2d day earlier going to bed so it's ready to go when you wake up in the morning.

For example, if you lot smoke a make clean bong first thing Mon morning time, launder the residue out Tuesday nighttime earlier y'all striking the sack.

Wake up Wed, toke to your heart'south content, so launder the bong again before bed Thursday night. Repeat ad infinitum.

Eventually, it will go habit and y'all'll do it without fifty-fifty thinking almost it — which is good considering you'll exist stoned out of your gourd.

Casual Smokers

Casual smokers should clean their bongs after every use.

It seems counterintuitive that heavy smokers can make clean their bong less, just it all comes back to bacteria growth.

Casual smokers oft go days between one smoke sesh and the adjacent. When you lot don't field of study the bacteria to oestrus and fume every few hours, information technology has plenty of time to grow and get stronger.

If you're planning on toking one, two, or 3 times a week, clean your bong after every use.

You'll avoid the event of bacteria growth entirely and savour adept flavors and aromas every time.

Signs That You Should Clean Your Bong Immediately

Slimy Pic

The slimy film that coats your bong after several uses is the perfect place to abound fungi and leaner.

Equally we mentioned earlier, leaner is extremely harmful if plenty of information technology gets into your lungs.

Fungi (a.k.a. mold) is also no skillful when it comes to your lungs and respiration. Certain fungi tin cause medical bug, not to mention kicking your allergies into high gear.

Resin Build Up

Dealing with resin is a fact of life for the regular bong user. It builds up in all sorts of hard-to-reach places and can seriously affect the sense of taste, odor, and overall experience of your marijuana.

If you run across a slight discoloration and a thin layer of stickiness anywhere on your bong, follow the instructions below to remove that resin from the inside of your piece.

If you neglect the resin buildup too long, it could actually attach permanently to the surface of your bong. No affair what you practise after that, you won't exist able to remove all the resin. Your only recourse will be to discard the bell and get a new one.

Chocolate-brown, Stinky Water

Even if you leave clean water in your bong for a few days, information technology will eventually grow stagnant and turn brown and stinky.

Remember the swamp illustration we used above? This is it in a nutshell.

Smoking a bowl or two without changing the h2o in-between but accelerates the stagnation process considering y'all've introduced smoke and other impurities into the mix.

Yep, that'due south the water's task — to filter out some of the harshness of the pot fume — but those impurities build upwardly over fourth dimension. The h2o will start to olfactory property and will get a breeding ground for leaner.

Nobody wants to hit a bong full of swamp h2o. Who knows what else they'll be breathing in?

Dump your bong h2o afterward every use and replace with fresh h2o the next fourth dimension effectually.

White Or Black Specks

White or blackness specks on the inside of the bong point ash build upward. If not removed on a regular basis, this ash forms "chunks" that you can accidentally dislodge and inhale if you're not conscientious.

And simply every bit it sounds, pieces of ash in your lungs is never a expert thing. Scrub that ash off your bong and avert the problem altogether.

How To Make clean A Bell: The Ultimate Guide

Cleaning a bong may seem like a daunting task. And in some respects, it is. Information technology's non similar yous can get your hand downwardly in there to scrub out all the gooey mess. But just considering it's daunting doesn't mean it shouldn't be done.

In this department, we'll tell yous everything you lot demand to know to get your bong spic-and-span clean similar the 24-hour interval you bought it.

Here'south what y'all'll need:

• Hot water
• Rubbing booze
• Salt
• Cotton assurance
• Q-tips
• Manus towels
• Small Ziploc bags or tupperware containers with lids
• Bottle brush or pipe cleaners (optional)

Now that you've assembled all your supplies, here's a step-by-step guide for how to clean your bell.

Source: Shanti.eu

1) Dump Out The Muddied Bong Water

You'd think this would exist a given and not worth mentioning, but the simplest thing tin can be overlooked when y'all're flying in a blue dream. We want to be thorough and so here's your reminder:  dump out the bell water first.

two) Have Apart Your Bell

Dissever the basin and the stem from the bong proper. If your bowl and stem are ii pieces, carve up those as well. If your bong has whatever other movable or removable parts, judge what? You lot need to have those apart too. Your bong should now be completely disassembled.

3) Rinse Everything With Hot Water

Hot running water is a nifty style to start the cleansing process. It dislodges some of the surface resin that has built up with repeated use and starts to dissolve the bonds that bind the gunk in place.

Get the water every bit hot as yous tin tolerate and consider wearing dish-washing gloves (those ugly yellow things). The gloves allow you to brand the water hotter which turbo-charges the process.

If you think about information technology while you're rinsing, fill from the peak and empty from the slide opening. This will minimize the chances of the loose rest getting defenseless anywhere else.

four) Put Each Loose Piece In Its Ain Container

And no, you don't want to employ the same baggies your weed came in. We're trying to make clean things here folks. Tupperware containers with lids also make for a great reusable, earth-friendly alternative.

And, no, you don't have to put the bell itself in a baggie or plastic container. We'll clean that past itself in a later step.

Afterwards y'all've got each loose piece in its ain baggie or tupperware container, pour in at to the lowest degree ¼ cup of your rubbing alcohol forth with at to the lowest degree one tablespoon of salt.

For larger pieces, go with ½ loving cup rubbing alcohol and two tablespoons common salt. The proportions aren't really important, only so that both ingredients are there.

Chemistry Note

Rubbing alcohol is mildly acidic which helps to breakdown the gummy resin that builds upwards inside the bell.

Table salt is an annoying that works in concert with the acid to add scrubbing power to the solution.

As an alternative to the rubbing alcohol, y'all can use vinegar which is likewise a balmy acid. As an alternative to the salt, y'all can use rice to aid scrub the bell clean.

If yous cull to use rice, don't let it sit down likewise long in the booze (or vinegar) because it will outset to absorb the liquid and soften. This will decrease its annoying power.

And if you do determine to use rice, don't consume it no affair how hungry you lot get. Those pesky (or awesome) munchies can make yous swallow some really weird stuff. Resist the urge to brand stir fry with the rice you utilize to clean your bong…no matter how delicious it looks

5) Shake

Later you seal the baggies or plastic containers, milkshake them vigorously. This moves the alcohol and the table salt through all the tiny curves and crevices and breaks up the marijuana resin that has gathered there.

When you think you've shaken enough, milk shake more than. You may have to practise this for at least 5 minutes to really dislodge the sticky mess.

If you've added enough alcohol to completely cover each piece, you tin permit them soak for 10 to fifteen minutes, and so come back and shake some more. This is especially useful if you've congenital upwards layer upon layer of bong resin from years of apply.

Once the small pieces are clean to your satisfaction, set them aside (still in their baggies) and turn your attention to the principal event: the bong itself.

vi) Pour Salt In The Bell

Source: Spoonuniversity.com

Add at to the lowest degree ii tablespoons of salt into your bong ; three would be better. Depending on the size of the pipe you're using, y'all may want to add iv or v.

Remember, salt will dissolve in liquids, and so put enough salt in the bong that some stays out of solution (not dissolved). This helps increment the abrasiveness of the solution you're making.

vii) Pour Booze In The Bong

Cascade at least ½ loving cup of rubbing booze into your bong. Once again, depending on the size of the pipe itself, you lot may need to add more. Don't worry most the ratio of common salt to alcohol. It really doesn't brand any deviation every bit long as in that location's enough of both to get a expert swishing going.

8) Plug The Holes

Using the mitt towels, plug all the holes in your bell. You tin likewise use plastic wrap and prophylactic bands to seal the holes. If the holes are small enough, you could also use cotton assurance. If you really wanted to become fancy, yous could purchase a few chalice stoppers from your local chalice shop.

If you alive in an surface area with no beaker store (nosotros feel sorry for you), just identify one mitt over the mouth and one paw over the hole where the stalk goes. Don't forget to put a finger over the carburetor hole.

ix) Milkshake

Simply similar yous did with the pocket-size pieces in their baggies, shake the bong vigorously and then that the booze and table salt solution gets moved around on all surfaces. Continue to shake the whole thing for at to the lowest degree five minutes. Then milkshake longer.

While you're shaking the bong, you can be satisfied that you got your practise for the day. Who knew shaking would exist such hard work?

10) Rinse Everything With Hot Water

Remove the pocket-size pieces from their baggies and dump the alcohol/salt solution from the bong. Rinse everything with the hottest h2o y'all can get.

Rinsing helps to remove the residual resin, the table salt, and the alcohol from the surfaces of your bong. If some stubborn pieces remain (peculiarly in the basin or the stem), utilize a Q-tip or a canteen brush (probably available at your local beaker store) to option away at the mass.

Afterwards yous remove that last trivial piece, rinse again with hot water and allow everything air dry before using again.

eleven) Repeat (Optional)

If it'southward been years or since concluding yous cleaned your bong (start, ewww), you may have to repeat the entire process again (or even several times). Eventually, the booze, the salt, and the repeated agitation volition peel away the layers of goo to reveal the sparkling glass underneath.

Preventative Maintenance

The higher up process can take some time, especially if you've gone a while without cleaning. To avoid a difficult mess, clean your bell regularly (as in after every apply) rather than once a month or longer.

And before you say, "No way," cleaning afterwards every utilise is equally simple every bit rinsing with hot water because you don't have all the gook built upward from repeated employ. Cleaning it like this volition drastically reduce the time you spend on this activity.

Retrieve about it this manner: would you rather spend 3 minutes or less cleaning your bong later on each use (you're washing pizza plates anyhow) or an hr or more after a few weeks of resin build-up? The answer seems obvious to us.

Here are some other tips to brand keeping your bong an easy job.

1) Utilize Vinegar Or Lemon Juice For Hard H2o Stains

Source: Rd.com

Hard water stains can be hard to remove, peculiarly from the inside of a bong. What's more, they make your bong await dingy even when it'due south non.

To gainsay the build up hard water stains, cascade some vinegar into the bowl of your bong and swish for a infinitesimal or two. For added cleaning, let the bell sit with the vinegar in the bottom for a few minutes afterward y'all're done swishing. Finally, rinse with hot h2o and allow the whole affair air dry.

Another method for combating hard water stains is lemon juice and hot h2o. Combine the hot water and lemon juice in the bowl of your bong and then swish. Allow it sit for a few minutes and so rinse with hot water.

2) Add together 2 Drops Of Lemon Juice To The Water While You Smoke

Source: Nutritionsecrets.com

Fresh lemon juice contains enzymes that break down the gooey resin that builds upwardly on the inside of your bell. Adding just ii drops to the water you use while smoking, prevents the gunky mess from forming. The lemon juice also helps kill the icky bong water smell and keeps things fresh.

Information technology merely takes a few drops to reach the desired outcome. In this example, more is not better. Besides much lemon juice will offset to overpower the flavors of your favorite strain . Two minor drops is plenty.

3) Store Your Bong Empty

Again, this may seem similar mutual sense, only we desire to be certain and embrace all our bases. After you've come down from your date with Mary Jane , just empty your bell and rinse it out every bit outlined in a higher place. This will go on everything clean and tidy and gear up for your next smoke.

Putting It All Together

Cleaning your bong doesn't accept to be a major undertaking and you don't have to employ specialized cleaners with all kinds of toxic chemicals. Merely a quick rinse with a few natural ingredients afterward every utilise (or every other employ) will have your bong sparkling and crystal clear as the twenty-four hour period you bought it.

For more than information on all things cannabis and to check out our 100-percent all-natural marijuana products, visit HonestMarijuana.com today.

hammcooncers.blogspot.com

Source: https://honestmarijuana.com/how-to-clean-a-bong/

Share this post